Can I run an OpenVPN server on Windows?

Access Server supports VPN connections from Windows devices using a VPN client app . Our app, OpenVPN Connect, is available for Windows, and makes it easy to do that. Each Windows device needs a client application to connect with Access Server.

How many connections can OpenVPN handle?

By default, max-clients = 1024 .

Does Windows support OpenVPN?

OpenVPN Connect v3 supports Windows 7, Windows 8, Windows 10, and Windows 11 .

Is OpenVPN access Server free?

Access Server's free tier allows you to install and start using our powerful VPN solution without a subscription or license . Enjoy the free functionality of Access Server right from the start, with no time limits and two simultaneous connections for free.

What ports does OpenVPN access Server use?

OpenVPN daemons interface and ports By default, they listen on all available network interfaces, using UDP port 1194 and TCP port 443 . You can customize these settings via the Admin Web UI or CLI.

How do I manually run OpenVPN?

To run OpenVPN, you can: Right click on an OpenVPN configuration file (.ovpn) and select Start OpenVPN on this configuration file . Once running, you can use the F4key to exit.

What are the limitations of OpenVPN?

Limitations. When routing all VPN client internet traffic through Access Server, we recommend not exceeding 1,000 VPN connections per Access Server installation . This limitation is a practical limit on how many NAT connections a single operating system can handle efficiently.

What is the bandwidth limit for OpenVPN server?

OpenVPN allows n to be between 100 bytes/sec and 100 Mbytes/sec . You should add a client config file for this user. However, this makes the whole situation pretty useless as the client can override the setting. If you only set it on the server its for all clients and only outgoing traffic from the server.

Does OpenVPN redirect all traffic?

Pushing the redirect-gateway option to clients will cause all IP network traffic originating on client machines to pass through the OpenVPN server . The server will need to be configured to deal with this traffic somehow, such as by NATing it to the internet, or routing it through the server site's HTTP proxy.

Can you run OpenVPN in a container?

OpenVPN installation on Docker involves creating a data volume, an image-based container , and a client configuration file. The configuration file requires a valid SSL certificate, also generated during installation.

OpenVPN server on Windows - Teltonika Networks Wiki (2024)

Main Page > General Information > Configuration Examples > PC > Windows > OpenVPN server on Windows

1 Introduction
2 Configuration overview and prerequisites
3 Step 1: installing OpenVPN software
4 Step 2: preparing EasyRSA
5 Step 3: generating certificates and keys
6 Step 4: OpenVPN server configuration
7 Step 5: configuring clients
8 Step 6: launching the server
9 See also
10 External links

Introduction

OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities.

Configuration overview and prerequisites

Before we begin, let's overview the configuration that we are attempting to achieve and the prerequisites that make it possible.

Prerequisites:

A PC or Laptop running on Windows 7 or a later version
The computer in question must have a Public IP address
And an active Internet connection

Objective:

The purpose of this article is to provide the know-how needed to configure a working OpenVPN server on a Windows PC.

Step 1: installing OpenVPN software

Download an OpenVPN installer file from here.
Run the downloaded file.
Before starting the installation process, click 'Customize':
While in the 'Custom Installation' window, scroll down to find OpenSSL Utilities → EasyRSA 3 Certificate Management Scripts; make sure it is installed along with OpenVPN and click 'Install Now':

Step 2: preparing EasyRSA

Now we can start preparing to generate certificates and keys. For this we'll be using the EasyRSA 3 application that was installed along with OpenVPN.
EasyRSA commands have to be executed via the Windows Command Prompt. It can be opened by typing cmd in the Windows search bar (Windows button + S). When you launch it, make sure you run it as administrator:
Change the current directory to the EasyRSA folder. To do so, execute this command:
```
cd "C:\Program Files\OpenVPN\easy-rsa"
```
Launch EasyRSA:
```
EasyRSA-Start.bat
```
Before you can generate files with EasyRSA, you must first initialize a directory for the Public Key Infrastructure (PKI). This can be done with the following command:
```
./easyrsa init-pki
```
Open the vars.bat file with the Notepad text editor:
```
notepad vars.bat
```
This is the template file for generating certificates, i.e., the information stored here will be offered as default values during certificate generation. Locate and edit the following lines in accordance with your needs:
```
set KEY_COUNTRY=USset KEY_PROVINCE=CAset KEY_CITY=SanFranciscoset KEY_ORG=OpenVPNset [emailprotected]
```
You can also set the key size for the Diffie Hellman parameters:
```
set DH_KEY_SIZE=2048
```
Once you're done, save the file and close the editor; then run the following commands:
```
vars.bat./easyrsa clean-all
```

Step 3: generating certificates and keys

Now we can start generating the certificates and keys. Begin with the certificate authority (CA) - the root certificate file that will be used to sign other certificates and keys:
```
./easyrsa build-ca nopass
```

Next, build the server certificate and key:

./easyrsa build-server-full server nopass

Next, build certificates and keys for the clients:
```
./easyrsa build-client-full Client1 nopass
```
Note: replace Client1 with this client's Common Name (CN). Omit "nopass" and you will be prompted to choose the client's password.
Lastly, generate Diffie Hellman parameters:
```
./easyrsa gen-dh
```

The generated and signed files should appear in the following directories (by default):

File(s)		Location
CA certificate	→	C:\Program Files\OpenVPN\easy-rsa\pki
Diffie-Hellman parameters	→	C:\Program Files\OpenVPN\easy-rsa\pki
Client and Server keys	→	C:\Program Files\OpenVPN\easy-rsa\pki\private
Client and Server certificates	→	C:\Program Files\OpenVPN\easy-rsa\pki\issued

Step 4: OpenVPN server configuration

In this section we'll be discussing how to configure an OpenVPN Tunnel (TUN) server that uses:

The UDP protocol
TLS authentication

As a template, we'll be using the sample configuration file that comes along with the OpenVPN installation, but we'll be adding with some minor changes to it. You can find it in the OpenVPN installation directory, sample-config folder (default: C:\Program Files\OpenVPN\sample-config) under the name server.ovpn.

When you locate the file, make a copy, rename it and place it in the config directory of the OpenVPN folder (default path: C:\Program Files\OpenVPN\config). You should also copy the certificates and keys to this directory (required files: ca.crt, server.crt, server.key, dh2048.pem).
Open the config file with a text editor. You can use the Notepad, but for editing configuration files we recommend using Notepad++ for a better experience (you can download it from here).

Locate the following lines:

ca ca.crtcert server.crtkey server.keydh dh1024.pem

Edit the lines in a way that corresponds with the actual file paths. The defaults used in this example are:

ca "C:\\Program Files\\OpenVPN\\config\\ca.crt"cert "C:\\Program Files\\OpenVPN\\config\\server.crt"key "C:\\Program Files\\OpenVPN\\config\\server.key"dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem"

NOTE: Diffie Hellman parameters file name will depend on the key size that you specified in the vars.bat file. Don't forget to change it accordingly.

Next comes the preferential configurations, i.e., whether you want UDP or TCP, Tunnel or Bridge, server's network, keep alive, cipher values, etc. You should configure these options in accordance with your needs. Bellow is an image of what the final configuration from this example looks like (with the comments present in the sample deleted file for more clarity):

The following changes were made to the sample file:

Changed udp to udp4 to indicate that the connection should use only IPv4
Added client-config-dir option for possible TLS client configuration
Changed the ifconfig-pool-persist file path
Changes to the certificate and key file paths
Note: cipher AES-256-CBC is deprecated in v.2.5. Change CBC to GCM
You can harden (add security) to the VPN by creating a ta.key (openvpn--genkey --secret keys/ta.key) file on the server, placing it in the config folder and copying it to the config folder of all client machines.
Edit the server.ovpn file found in the OpenVPN/sample-config folder. Lines that begin with # or; will be ignored.) Feel free to change it however you want.

Step 5: configuring clients

Install OpenVPN on all client machines, but omit Steps 2, 3 and 4 above. Just copy the ca.crt , client.crt and client.key files already created on the server machine in Step 4 above to the config folder of the relevant client machine.

The next step is to create a configuration file for the clients. Edit the client.ovpn file found in the sample-config folder and save it. Now open the separate article: OpenVPN client on Windows, but note that only the latter part is relevant to this page. Begin at the line "• Save the file with an .ovpn extension."

Note: The edited client.ovpn file can be copied to all the client machines unless specific changes need to be made.

Step 6: launching the server

If you've followed all the steps until now, your OpenVPN server configuration is complete! The next thing to do is to simply launch the server.

Run the OpenVPN GUI application as administrator in order for the application to be able to fill log files.
Locate OpenVPN GUI in the Windows system tray. Right click it and click Connect:

External links

OpenVPN downloads: https://openvpn.net/index.php/open-source/downloads.html
OpenVPN manual: https://openvpn.net/index.php/open-source/documentation/manuals.html
Notepad++ downloads: https://notepad-plus-plus.org/download/v7.5.8.html