Professional Tips On How To Make The Best Fried Fish (2024)

Fried fish is a delicious comfort food any time of the year. Making it at home can be intimidating if you aren’t used to working with hot oil in your kitchen. Once you try it, you’ll realize how simple it is to make restaurant-quality fried fish at home. Follow these instructions to make perfectly crisp and golden pan-fried or deep-fried fish.

How to Pan-Fry Fish

Pan-frying is the best technique to start with if you aren’t used to frying foods. You only need a thin layer of oil in the pan to fry it. Since you use less oil for this method, it is healthier, cleaner, and easier.

Step 1: Select the fish

Professional Tips On How To Make The Best Fried Fish (1)Mild-flavored whitefish are the most popular option, but you can also pan-fry shellfish like scallops and shrimp. You will need about 1 pound of skinless fish fillets or shellfish to serve 4 people. If you are planning to cook fish, the fillets should be between ½ inch to ¾ inch thick.

Step 2: Prepare the Fish

Under cold water, rinse off the seafood and then pat dry with a paper towel. If you are cooking fish, use a sharp knife to cut each fillet into four pieces.

Step 3: Make the Coating

To give the fish a crispy crust, you’ll need to make a coating for it.

Beat one egg and 2 tablespoons of milk or water together in a shallow dish.

Mix together 2/3 cup dry breadcrumbs or cornmeal with a dash of pepper and ½ teaspoon salt in another shallow dish. You could also use crushed crackers or potato chips instead without the salt.

Step 4: Coat the Seafood

Before you get started, preheat the oven to 300 degrees F. Then, add ¼ inch of shortening or vegetable oil to a large, heavy skillet. Place it on the stove and turn the burner up to medium-high.

Dip each piece of seafood into the egg mixture. Make sure each side is coated. After that, place each piece one-by-one into the second dish. Press gently so that the dry coating sticks. Coat both sides making sure that every centimeter of the seafood is coated with the dry mixture.

Step 5: Fry the Fish

Gently lay pieces of seafood in the pan with enough space in between so that none touch. You will most likely have to cook them in batches. The oil should sizzle when you lay them down. Cook each piece for 3 to 4 minutes or until you notice that the seafood looks golden along the bottom, then flip it over and cook it until that side is golden.

Both sides should be golden brown when you remove it from the heat. The meat should easily flake apart when you test one piece with a fork. Place it on a plate covered with paper towels to soak up the oil. Then put it on a baking dish in the oven to keep it warm until every piece is cooked.

Step 6: Serve the Pan-Fried Seafood

Serve with tartar sauce or slices of lemon.

How to Deep-Fry Fish

Step 1: Select & Prepare the fish

Professional Tips On How To Make The Best Fried Fish (2)Mild-flavored whitefish and shellfish are also great to deep fry. The fish fillets should be ½ inch thick and then cut into 3×2-inch pieces.

When you are ready to prepare the seafood, run it under cold water to rinse it off. Then pat dry with a paper towel.

Step 2: Heat up the Oil

Pour vegetable oil into a deep-fat fryer or heavy saucepan. It should be 2 inches deep. Heat it to 375 degrees F over medium-high. Also, preheat the oven to 300 degrees F.

Step 3: Make the Batter

For a rich, crispy crust, you need to make a batter. Panko breadcrumbs make the best batter for deep-fried fish.

Beat one egg and 1/2 cup of dark beer or milk together in a shallow dish.

Mix 1/3 cup flour and 1 teaspoon seasoning salt together in another shallow dish.

Pour 1 cup panko breadcrumbs into a sealable plastic bag.

Step 4: Coat the Seafood

Dip each piece of seafood into the flour mixture and then the egg mixture. Make sure each side is coated and no egg mixture is dripping. After that, place each piece, one-by-one, into the bag with panko. Seal the bag and shake until each piece is fully coated then remove.

Step 5: Fry the Fish

Fry the seafood in batches of four. Cook it for 3 to 4 minutes or until the seafood is golden. The meat should easily flake apart when you test one piece with a fork.

Place each fried piece on a plate covered with paper towels to soak up the oil. Then place on a baking dish in the oven to keep them warm until every piece of seafood is cooked.

Step 6: Serve the DeepFried Seafood

Serve with tartar sauce or slices of lemon.

We hope these instructions help you fry fish like a pro! Swing by City Fish Market for the best selection of fresh seafood in New England!

Professional Tips On How To Make The Best Fried Fish (2024)

FAQs

Professional Tips On How To Make The Best Fried Fish? ›

The ideal temperature for deep-frying fish is between 360 and 380 degrees. When pan-frying your fish, flip the fish only once to maintain a crispy texture. It's also important not to cover the pan-fried fish after cooking it. Generously apply the seasoning in fish recipes.

What is the secret to frying fish? ›

Fried Fish Tips

Don't overcrowd the pan with fillets, resist the urge to move the fish around once it's in the oil, and fry it long enough. Also, don't cover the skillet or fryer when frying the fish. That creates steam which will end up in a soggy and greasy coating.

How to get a good crust on fried fish? ›

For a rich, crispy crust, you need to make a batter. Panko breadcrumbs make the best batter for deep-fried fish. Beat one egg and 1/2 cup of dark beer or milk together in a shallow dish. Mix 1/3 cup flour and 1 teaspoon seasoning salt together in another shallow dish.

Why do people soak fish in milk before frying? ›

Apparently, the proteins present in milk can bind to the fatty acids that have been exposed to air and give salmon its fishy odor or taste and mitigate them to be more neutral. (Fishiness is caused by the oxidation of fatty acids.)

Why put flour on fish before frying? ›

Don't skip the flour coating since it provides a delicious crispy texture, protects the fish from soaking up too much oil, and also keeps the fillet in one piece. For best results, use a heavy-bottomed pan, as it distributes the heat evenly.

What is the best oil for frying fish? ›

Best Oil to Fry Fish. Thanks to its neutral flavor, affordable price, and high smoke point, canola oil is the most popular oil for frying fish. Peanut, cottonseed, and coconut oil are also great fish frying oils.

How hot should oil be to deep fry fish? ›

Temperature is very important. You'll need a deep-fry or candy thermometer. Bring the heat up slowly until the oil is between 350 and 375 degrees F — too low and you'll get greasy food, too high and it'll burn.

Does fish float when it's done frying? ›

Subsequently, drop into the fryer at 350°F for six minutes, or until golden brown. Consequently, if cooking in an open basket, fillets will usually float to top of basket when done. Finally, let fish rest for two minutes before serving.

Do you season fish before frying? ›

Don't skimp on seasoning.

Season both sides of the fish (since the salt doesn't get absorbed after frying) and drizzle the filet with olive oil (don't be afraid to keep adding more!), continuing to season with salt and pepper along every step of the way.

What is the best flour for frying fish? ›

Fish fillets dusted with flour and cooked until crispy makes a simple yet satisfying dish. The flour browns nicely and creates just the barest hint of a crust on the fish. For this technique, all-purpose flour is often used, and this is a great way to start.

How to fry fish perfectly? ›

Pan-Fry the Fish

The oil should be hot enough to sizzle when adding the fish to the pan. Fry the fish until golden on the bottom. For all those wondering, "How long does fish take to fry?": Pan-frying the average fillet takes about 3 to 4 minutes per side.

How do you get batter to stick to fish for frying? ›

Milk: The proteins in milk help the batter adhere to the fish and promote browning. Water: Use very cold water for the crispiest results. Baking powder: Baking powder ensures a light and crispy exterior.

How do I make sure my fish is crispy? ›

Pan-searing to achieve a crispy skin is one of the most delicious and quick ways to cook a piece of a fish! To nail shatteringly crunchy skin every time, you just need dry skin, hot oil and press down lightly to help the skin contact heat as it cooks.

Top Articles
Latest Posts
Article information

Author: The Hon. Margery Christiansen

Last Updated:

Views: 5503

Rating: 5 / 5 (50 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: The Hon. Margery Christiansen

Birthday: 2000-07-07

Address: 5050 Breitenberg Knoll, New Robert, MI 45409

Phone: +2556892639372

Job: Investor Mining Engineer

Hobby: Sketching, Cosplaying, Glassblowing, Genealogy, Crocheting, Archery, Skateboarding

Introduction: My name is The Hon. Margery Christiansen, I am a bright, adorable, precious, inexpensive, gorgeous, comfortable, happy person who loves writing and wants to share my knowledge and understanding with you.