Smash Burgers Recipe (2024)

Ratings

4

out of 5

2,458

user ratings

Your rating

or to rate this recipe.

Have you cooked this?

or to mark this recipe as cooked.

Private Notes

Leave a Private Note on this recipe and see it here.

Cooking Notes

Susanne

I love this burger but a way to achieve the same result without any splatter from oil or butter is the Mark Bittman steak technique where you heat the cast iron pan on high for 3 minutes or so until very hot, even smoking, add some salt to the bottom of the pan, lower the heat to med high and cook 2 to 3 minutes per side. No splatter and a crisp, perfectly done burger. Add cheese as Sam suggests if you like.

BR

One issue.

If you like cheeseburgers, and I do, the cheese won't melt sufficiently unless you overcook the meat, which is no good. So I put a cover over the pan as soon as I flip and put the cheese on.

soo

I have that problem too- esp living in an apt- I have no outdoor option. just read an article about cooking steak and they said oil the meat only, instead of pouring it in the pan and there will be less smoke because a lot of the smoke is from the excess oil in the pan... i haven't tried it yet but seems to make sense and I'm willing to see if it helps!

Jim

To keep the burger from sticking to your spatula when you smash, place a small piece of parchment paper on the burger before pressing down.

Erin

I am a vegetarian mother to a ravenous carnivore teenager. This tutorial was invaluable to me. My son rated it 11 out of 10. The first time I made it was for his birthday so his dad (my ex) was there and tried to tell me how to do it. I said "back off, Sam Sifton taught me how to do this" (it was a very friendly exchange )

LK

Why didn't you size the burger to the bun?

JoanC

A revelation. Who knew that a flat, crispy on the edges burger could have so much more flavor than the half pound behemoths currently in vogue? Having been frightened out of my wits by the smoke alarm a week ago I took the cast iron skillet outside and heated it up on the grill for 20 minutes while I was making cole slaw. Worked like a charm. Plus closing the lid on the grill melts the cheese really quickly. A winner, Sam, thank you!

max

You can add one slice of ground bacon (freeze and cut into tiny pieces) to each patty for some smoke flavor and to get the fat ratio closer to a real diner burger. I actually like smashing these very thin on parchment paper and seasoning each side then. I do 1 minute and about 40 seconds. Flip, add cheese, and then 1 more minute. I cook it in butter and spoon the fat onto the cheese to help melt the cheese. This is also really good with two pattys per burger.

MCVK

This is a fabulous recipe! I cooked a burger your way the week you published it and have tried to eat one a week ever since (anemia). My whole life, I'd eat a burger only if someone else cooked it. Now I can make my own great burger and feel as if I'm dining out. I know it's simple, but I wasn't able to figure it out on my own. This is probably my most favorite recipe of all time, and I've been reading your food section for 40 years.

Lori

This is my favorite kind of burger, that crispy outside with a rare inside is the BEST!

Lily

This is our go-to burger, but we can't cook these indoors because the smoke alarm goes crazy. I used to put the cast iron griddle on the grill but I found an easier way: I take my pancake griddle out to the porch or garage, depending on weather, and heat it to the max for 10 minutes and then follow the directions here.
We get a crusty burger with a nice rare center, oozing juice. Crusty/juicy - that's for us.

Kathryn B. Mark

A terrific alternative to the HUGE burgers frequently served at my abode. While men like the biggies, they were dumbfounded with the deliciousness of the skinny ones.

Niclas

The burger got a really nice crust on it. Important to use a really hot pan as it takes too long to get the crust otherwise, and it just gets overcooked instead.

Gil

My cooking weight is a scrubbed brick that is flat on one side, wrapped in foil and kept clean.

Dmaniac278

I've made good burgers at home, but this is a great burger. My dear wife put Grandma's cast iron skillet on the grill, kosher salt, lots of black pepper, extra sharp cheddar. and let 'er rip—no condiments required. If you plan to make this burger with any frequency (which I do), invest in a wood-handled cast iron burger press, like they use in the diner. You'll get a flatter, smashier burger with more crispy edges. Also great for cooking bacon.

Patty’s Place

Followed the advice in the comments to salt the cast iron pan and put the oil on the meat so there wasn’t so much smoke. Delicious!

Daniel

People aren't kidding when they said it was a lot of smoke, especially if you do it in batches.

Candace

Just a little tip: I use my potato masher (sprayed with Pam) rather than a spatula. Works great!

Sam Lehman

Great recipe but a few suggestions:1. Make 2-2.5 oz balls instead of 4 oz. but put 2 per bun. These cook even faster2. You need more than a spatula to really flatten them. Worth buying a meat press3. Definitely need small piece of parchment paper but you can re-use for all the burgers.4. After flipping put raw onions and cheese on top of 1/2 the patties and then cover with a second patty. Time this well.5. Toast buns, add condiments and plate before cooking the meat, then transfer

Scott

Sam, Sam, you wonderful man! I have cooked these three times and even the picky kids ate them. I did, however, use bacon fat to cook them (too lazy to clean out the cast iron skillet after bacon for breakfast). They came out most awesome! I discovered leaving them as close to the edge of the skillet as I can gives you the nice crust, but still leaves them medium/medium rare (depending on which part of the skillet they are in) and still melted the cheese. Definitely going in the dinner rotation!

Sara Krohn

in the video, while cooking, a paper or small sheet of something is placed over the burger when it is smashed a second time. what is that sheet made of?

Colin Sumby

Easy peasy lemon squeezy!

Douglas

I like the advice, found elsewhere in NYT Cooking, to put a slice of lettuce under the burger rather than on top of it. This prevents to bottom bun from getting soggy.

Cas

These are perfectly crusty, juicy and super tasty! A few takeaways from the comments: took my cast iron griddle outside to the grill; sprinkled coarse salt on the griddle before adding the meat - amazingly kept the grease splatter down and most effective for me, pre-smashed the burgers between parchment sheets. Best burgers we have ever made at home - can’t wait to make them again!

Jude

I mix the meat with chopped onions and a little garlic before cooking.

Gulliver

Two more tips: put some thinly sliced raw onions on top of the burger once you smash it for the first time and then push down a little bit more, and then when you flip the burger, those onions will char really beautifully. Also definitely add coarse salt, freshly ground pepper and a little bit of garlic powder on both sides each time you smash.

Just Learnin'

Okay. Why not form the patties with hands??Newbie cook here.

Richard

Okay. You don't want to overwork the meat, and the heat of your hands will affect the fat, melting it before it hits the heat of the pan. If you don't handle with your hands, the burger won't become tough as it cooks.

BSD

Trust me. This method works.

Michael Werner, Mindtrekker

God, these are good. Have become a Smashburger-At-Home convert in the last year. Don’t know what took me so long.

Joe R

I've been making these things for the last two years ever since I discovered the eponymously name Facebook group. I will never make a burger any other way. Have a big old cast iron griddle that I bring out to the grill and have at it. Unless you have an industrial grade exhaust hood, I'd never try these inside.

Doug C.

What does it mean to gather the small piles of meat into "orbs"?

Richard

An orb is a little ball of meat, in contrast to a flattened patty.

Private notes are only visible to you.

Smash Burgers Recipe (2024)

FAQs

What is the best beef ratio for smash burgers? ›

The magic of the smash burger (that crisp, caramelized crust) comes from the combination of high heat and the high fat content of the burger. Because of this, smash burgers don't work as well with a leaner ground beef, so aim for an 80-85% meat to fat ratio. Ground chuck would also work wonderfully here.

What is the best seasoning for smash burgers? ›

Seasonings – I like to use a combination of salt, pepper, paprika, Worcestershire, and Tabasco sauce. In addition, finely minced bacon makes it into my best smash burger recipe. Cheese – American cheese is used for the smash burger. Buns – Classically, potato buns are used, but I prefer brioche buns.

How many smash burgers will 2 pounds make? ›

Ground Beef. I use an 80/20 meant to fat ratio. One pound makes four burgers.

Why put mustard on smash burger? ›

The mustard caramelizes on the griddle, softening that piquant quality mustard can have, and creating an even crispier crust as the burger patties get smashed.

How do you make smash burgers without them falling apart? ›

Rule 2: Smash early and smash firmly.

You'll need one to do this properly. Form four to five ounces of meat into a puck about 2 inches high, season liberally with salt and pepper, and place it on the preheated skillet, then smash down on it with the spatula, using a second spatula to add pressure if necessary.

Do you cook smash burgers on high or low heat? ›

To Make the Patties:

Place a cast iron over medium-high heat. Preheat the pan until hot and then add about a teaspoon or two of oil. Add two patties, spacing them about 4 inches apart, and then smash them flat with a spatula to form patties that are 4-inches in diameter.

Do you season smash burgers before cooking? ›

Season the outside of the burgers right before cooking rather than adding the salt to the meat mixture. Without any binders in the meat mixture (like my steakhouse burgers have), salt will give the burgers a strange texture (read the scientific explanation on Serious Eats here).

Why are my smash burgers tough? ›

Gently roll the meat into a ball, smash it, and grill it. This is key, because overworking the meat can make the proteins too tough, delaying the Maillard reaction and keeping the juices from soaking back up into the burger.

What does Gordon Ramsay use to season burgers? ›

The Burger
  1. 1 lb 85/15 ground beef (chuck and brisket)
  2. 2 oz frozen unsalted butter.
  3. 1 tbsp granulated garlic or garlic powder.
  4. 1.5 tbsp Maldon salt.
  5. 1 tbsp fresh cracked black pepper.
  6. 1 tbsp olive oil.
  7. 2 slices swiss cheese.

How do you bind smash burgers? ›

Some heavy-duty protective gloves can help. As soon as the patties are flipped, and I mean as soon as they're flipped, add cheese to one patty and stack the other on top. I'd recommend using either a store-bought American cheese or homemade melty cheese slices. You need a good melter to help bind the patties together.

How do you make smash burgers stay together? ›

You smash them, with a spatula. I use a salt shaker to press down on the spatula while smashing. Once smashed, they always stay that way, for me anyhow. If your smash burgers are balling up after you've smashed them, you might want to get an exorcism of your kitchen, or something, because that's otherworldly.

How hot should pan be for smash burgers? ›

Preheat on high heat for 10-15 minutes, looking for a surface temperature of 400-425 degrees F. To test the surface, sprinkle a few drops of water on top of the surface; they should “dance” rapidly across the hot surface, evaporating in moments.

How hot should griddle be for smash burgers? ›

(Smash burgers cook fast, so toppings need to be ready ahead of time!) 3. Pre-heat skillet on medium-high to desired temperature of 400°F to 500°F. No oil necessary.

What size balls for smash burgers? ›

3oz is the perfect size for a single patty per burger, or use two balls for a double smash stack burger. This product is unseasoned to allow you to add your own seasoning. We recommend freshly ground black pepper and sea salt. Want some extra flavour?

What is the binding agent for smash burgers? ›

Because nothing melts like American cheese, and with a smashburger it's important to use the cheese as a binding agent to prevent the patties from falling apart. A good smashburger is held together with nothing but love and American cheese.

Do you flip a Smashburger? ›

Place the burgers on the skillet one at a time, firmly smashing them flat with a metal spatula until about ¼-inch thick before adding and smashing the next one. Let cook for about 2 minutes until nicely browned and crusty on the bottom. Flip the burgers. Top the burgers with the cheese.

How do you get smash burgers to stay together? ›

You smash them, with a spatula. I use a salt shaker to press down on the spatula while smashing. Once smashed, they always stay that way, for me anyhow. If your smash burgers are balling up after you've smashed them, you might want to get an exorcism of your kitchen, or something, because that's otherworldly.

Do you put oil down for smash burgers? ›

Preparation
  1. Add oil or butter to a large cast-iron or stainless-steel skillet and place over medium heat. ...
  2. Increase heat under skillet to high. ...
  3. Cook without moving until patties have achieved a deep, burnished crust, a little less than 2 minutes.

Top Articles
Latest Posts
Article information

Author: Corie Satterfield

Last Updated:

Views: 5883

Rating: 4.1 / 5 (42 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Corie Satterfield

Birthday: 1992-08-19

Address: 850 Benjamin Bridge, Dickinsonchester, CO 68572-0542

Phone: +26813599986666

Job: Sales Manager

Hobby: Table tennis, Soapmaking, Flower arranging, amateur radio, Rock climbing, scrapbook, Horseback riding

Introduction: My name is Corie Satterfield, I am a fancy, perfect, spotless, quaint, fantastic, funny, lucky person who loves writing and wants to share my knowledge and understanding with you.