1 Gallon Mead Recipe | Best Honey Mead Recipes - Hidden Legend Winery (2024)

Having a 1 gallon mead recipe is something any brewer should keep on tap for when the ancient ways come calling. It’s a great way to get into home-brewing, create a gift or a money saver for a party, and to just generally show off your Viking coolness. The reason you want to start off with a simple1 gallon mead recipe is that it’s a small batch that won’t require too much investment. It’s more to give you a feel for making this historic drink and see if you want to keep exploring.

Think of it like cooking and following a recipe. We’ve provided a simple and yet traditional mead recipe to wet your whistle and give you a feel for mead. Looking over this page you may become overwhelmed, but don’t fret. This is a simple honey mead recipe and we just wanted to make sure each step was as clear as possible.

Most are made by fermenting honey mixed with water; mead is a century-old alcoholic beverage. Sometimes it is also made with some other ingredients like fruits, spices, grains, or hops. Its origin dates back centuries as part of histories across continents. It is still a popular drink enjoyed by people who appreciate its unique taste and history. Mead has a diverse flavor profile from dry to sweet and from still to sparkling and has a wide range of alcoholic content from 3.5% to 20%, depending on the making. The rich taste and history make mead one of the world’s most sought-after and popular beverages.

Honey mead has a fascinating history that intrigues every alcoholic beverage lover. Many have tried making it at home but have failed because they can’t get the portions right. If you want to know how to make honey mead, you are in the right place. The following is a simple honey mead recipe that will help you make approximately 1 gallon of mead. Read on to know more.

2 – 1 Gallon jug
1 – 2 Gallon Fermenter bucket (You can use a jug but the bucket is preferable)
1 – Hydrometer
1 – Hydrometer jar
1 – Thermometer
1 – Air lock and drilled rubber stopper
1 – Siphoning hose
1 – Carboy brush
1 – Stirring spoon
1 – 2 cup measure
1 – Funnel
1 – 2 Oz Pack One Step Sanitizer

Take a look at our completemead making equipment kit.

• 3 lbs of honey
• Approx. 12 cups of water (Do not use chlorinated water! If you are on city water, buy distilled or spring water at your local store. If you are on a well, your water should be fine unless you have a water softening system)
• 5 grams of yeast
• ½ tsp of yeast energizer
• ½ tsp of yeast nutrient
• ¾ tsp of Potassium Sorbate

We’ve put together amead making ingredientkitfor sale.

1. Sanitize all your equipment using One Step and water solution as per the instructions on the packet.
Note: Never use bleach! Bleach will react negatively with the fermentation process.

2. Put 4 cups of hot water in your 2-gallon fermenter, measure out about 2 ¾ lbs of honey and mix with the warm water in your bucket.

3. Add 8 cups of cold water and stir

4. Put must (honey and water mixture) in your hydrometer jar and float your hydrometer. Record your sugar level in brix on your chart. You should have 22.5 brix. This recipe will produce about 12.8% alcohol.

5. Use the stick-on thermometer on your 2-gallon fermenter. You should have between 65 and 75 degrees.

6. Add your yeast energizer and yeast nutrient stirring gently until dissolved.

7. Pull out about 1 cup of your must in a two cup measure and pour your yeast pack in and stir gently. Let it sit for about 15 minutes or so. When it starts to foam, gently pour back into your fermenter bucket. Close your fermenter lid firmly, making sure it doesn’t leak, and install your airlock.

8. Your mead will start fermenting after a couple of hours. You will see your airlock start bubbling. Keep your fermenter in a place between 65 and 75 degrees and let the yeast do its work. This could take 10 to 20 days.

9. When your air lock bubbling slows down dramatically, rack your mead into your 1-gallon jug using your siphoning tube. Be careful not to siphon up the sediment on the bottom of the fermenter.

10. During racking, fill your hydrometer jar and measure your sugar level in brix with your hydrometer and record the reading on your chart. Return the mead in your hydrometer jar into your glass jug after you are done measuring the sugar level.
If you still have sugar content above 2 brix, you can add another ½ tsp of yeast energizer at this point and let it continue to ferment in your glass jug.

11. When your fermentation is complete, you will see sediment settling in a distinct layer in your glass jug. (at this point your hydrometer should read a sugar level close to zero, if it doesn’t, add more nutrient and energizer and continue fermentation)

12. When this visible settling is down to the bottom of the jug, rack your mead into another jug. (if you don’t have another jug, use your cleaned fermenter bucket and then siphon the mead back into the glass jug after you have cleaned the jug.

13. Once you have achieved your desired fermentation and racked your mead off the leas (sediment at the bottom) add ¾ tsp of Potassium Sorbate to your mead.

14. Taste your mead. If you would like a little more sweetness, now is the time to add some of the honey you have left over from your starting 3 lbs. The sorbate will keep any further fermentation from happening.

15. If you would like your mead to clarify a little faster you can add your bentonite as per the instructions on the packet. The down side to this is the bentonite creates a loose sediment layer and can waste more of your mead than just waiting for it to settle or using a filter like a Vinbrite Mark III.

16. After your mead clarifies to your desired level it is ready to bottle. Crystal clarity is not necessary if you like the taste.
Clean your bottles and bottling equipment. Bottle your mead. Your mead could improve if you want to put it away for a while. If you are thirsty, it’s ready to drink.

Each settling period could take a couple of weeks. Limit the amount of time your mead goes with the airlock removed. Excess head space should be avoided once your fermentation is complete. Clean marbles or glass beads can be added to your glass jug to eliminate head space. Please refer any questions you run into to[emailprotected].There are many mead recipes and theories about what makesthe best mead.

Thismead making supply pageis designed to give you everything you need to get started making mead. We hope you will find it as exciting and enjoyable as we do.

Cheers!