Ksp 2 Docking (2024)

FAQs

How do you transfer fuel in KSP without docking? ›

Your two vessels have to be docked to transfer fuel between them. The only way around this is by using a dedicated fuel vessel to dock to one ship and move the fuel to the other. The klaw can transfer fuel only if you have fuel crossfeed rules disabled in the difficulty settings.

In order to dock two spacecraft, both must be equipped with docking ports of equal size. When constructing a spacecraft, another part which is not a docking port can be placed on it. That part can then be undocked, but not redocked. This is a common mistake for beginners!

Press ALT+F12 to access the debug console, which you can use to enjoy unlimited fuel, unbreakable joints, and other helpful perks.

You may have a robust landing module but try to make sure when you land not to be travelling faster than 7 - 10 m/s, this is more important if you are landing in a mountainous area or a crater. To slow the descent, just put the thrust up by one tick until it reduces your vertical speed enough for falling.

How? right click on one tank and then use alt right click for another tank. then choose fuel in or out. If you are playing Career mode you will need the fuel transfer ability unlocked by upgrading your R and D building.

Getting into Mun Orbit

Once you have gotten into the Mun's SOI, warp to periapsis, turn towards the retrograde vector on the Navball, and activate the engine (Z key). You can cut the engine once you enter a circular orbit around the Mun.

Take it slow, make sure to target the docking port, and look at your navball to center it. Look at the two ships from different angles to line them up properly, keep the velocity vector on the target marker, approach slowly, and you'll dock!

Yes, you can connect more than one Elgato Thunderbolt™ 2 Dock together, using the Thunderbolt™ ports. However, this does not mean that you can necessarily use all of the available inputs effectively.

Hold F9 for quickload. Hold F5 to save, and F9 to load. If you haven't quicksaved recently, F9 can end up reverting you pretty far back however. Also, Alt+F5/F9 lets you do the same, but allows you to name the saves, has well has choosing which to load.

By default, the time warp can be increased and decreased with the . and , keys, respectively, and can be changed to physical time warp by holding the Mod key and pressing , . Upon changing the warp factor, the multiplication of normal time (in seconds) is shown in the top-center of the screen.

How do you deploy cargo in KSP? ›

The cargo bays all have a "deploy" slider in their context menus. It controls how far the bay doors open. To open and close the doors, right-click the cargo bay, and push the Open/Close button.

Kerbal Space Program

While in flight go into the the map and click the ship you want to control and select "switch to". Otherwise you can use the bracket keys if both ships are very close. You can edit the bindings on the options menu. [] bracket keys switch you between craft, if they are within range of you.